Type C-1400 Sample Cells-Single Open Ended

Product Dimensions

Overall Diameter With Flange: 46 mm

Overall Height: 18 mm

TECHREF® Type C-1400 Sample Cells are designed and manufactured specifically for use with Malvern Panalytical (Philips) X-Ray Fluorescence Analyzers which use the liquid cup carrier.

  • TECHREF® C-1400 Sample Cells enable use of the largest possible aperture, providing full use of the Malvern Panalytical (Philips) instrument sensitivity.
  • TECHREF® C-1400 Sample Cell fits smoothly & precisely in the Philips liquid cup holder, providing excellent positional reproducibility.
  • TECHREF® Type C-1400 Sample Cells are manufactured by an injection-molding process from a virgin low-density polyethylene.
  • Each Sample Cell consists of two parts:
    • A closed-bottom cup plus an outer, open ring which holds and seals the desired film after sample is loaded.
    • There are two fill lines in the interior of the cup for consistent sample size.
    • For volatile samples, there is a dimple on cup exterior floor for venting and a reservoir for overflow.
  • The Type C-1400 Sample Cells are fully disposable and do not require the use of adapter rings to fit the Philips liquid cup holder.
  • There is no need to disassemble them to recover reusable parts.
  • Our Sample Cell is designed to produce a flat, tight and wrinkle-free membrane with any customary XRF membrane-film product, ours or others.
  • TECHREF® Type C-1400 Sample Cells are packaged 100 per bag in a re-closable polyethylene bag.  The Type C-1400 Sample Cells are sold only by the bag.

Important Notes:

  • Handling of Sample Cells: Avoid touching the inside of the Sample Cell. Oil from fingerprints can affect the reading when analyzing for low levels of sulfur.

  • All XRF Sample Cells present the possibility of leakage, with potential damage to the analytical instrumentation. It is recommended that after the Sample Cell has been loaded with sample and assembled, check for any leaks. The use and application of this product is the sole responsibility of the user.

  • ®TECHREF Logo is Registered Trademark of TECHREF, INC.

SA05F06D Rev. H